Review: Beneteau Oceanis 34.1 is a competitor to Dufour 360

Deck design and engineering

Beneteau Oceanis 34.1 adopted all the distinctive features of its predecessor. The width remains the same large, the body is full-sized and practical, there are also double rudders and two helms.  

The layout of the deck has been changed to ensure maximum comfort and safety for yachtsmen. Mainsail controls (halyard and sheet) are located close to the cockpit, and winches are located along the sides to control the staysail sheets. The result is a spacious cockpit that is easy to use for both steering and lounging. Among other things, access from the cockpit to the aft bathing platform is fairly easy. 

The goal of the yacht's upgrade is to increase space on and below deck, as well as improve hull stability and roll speed. At the same time, maintain a relatively narrow waterline for better navigation in light winds.

Sailing armament and hull

The yacht is equipped with a self-tipping staysail and a classic lazy-bag mainsail. There is also an option to install the mainsail on a twist into a mast or a mainsail with a square top. The main sheet is brought to the cockpit, a little further from the rudders. There are models with genoa.

One of the interesting features of the boat is the absence of a backstay! The sailing rig is ⅞, and rhombus shrouds are also installed to ensure the reliability of the mast fastening. Thus, the engineers managed to free up space in the stern.

The boat has three keel options: large, shallow and hydraulic lifting daggerboard. All three options are good for certain conditions, so choose based on what you need.

Interior Design

The Nauta designers have created a chic, contemporary interior in elegant walnut or light oak finishes. Deck hatches and numerous portholes in the hull and roof let natural light into the boat and provide excellent ventilation. 

At the moment there are two available versions - with two or three cabins.

In the cabin there is a thoughtful convertible table providing two extra berths. An L-shaped galley is located on the starboard side, the chart table is located on the port side.

Specifications and comparison with Dufour 360

In a way, the Beneteau Oceanis 34.1 and the Dufour 360 are virtually identical. These boats compete quite hard among themselves in the "same weight category". Of course, the most noticeable differences are the presence of an afterstay and a bimini. Despite this, Dufour's classic sailing layout is to the taste of a greater number of our customers.

It is also important to understand that the price segment of boats is approximately the same. At the same time, the Dufour 360 is the perfect balance between the latest in yachting fashion and the traditional "buns" from the company. Just below you can compare the characteristics with your own eyes.

If you are interested Dufour 360, then you can check it out THIS link. Or leave your request in the form below.

Did you like the material? Don't forget to rate! By the way, we regularly publish a lot of interesting material, we recommend that you familiarize yourself with it using the links below!

17.02.2022